Peel and stick wallpaper can be a breeze to install if you prepare yourself well. This includes preparing your workspace and using the right tools and supplies.
Start by removing about 12 inches of the backing from the wallpaper and then applying it to the wall. Be sure to smooth it out with your hands and a squeegee.
Start in the Least Visible Corner
Peel and stick wallpaper comes with a self-adhesive backing that is activated upon contact with the wall. It adheres best to firm painted walls with an eggshell, satin or semi-gloss finish. Follow the manufacturer’s instructions on your specific product to ensure optimal adhesion and longevity.
Before you begin, clean and prep the wall surface. It’s also a good idea to remove switch and outlet covers, move furniture out of the way and wipe down all surfaces to be covered. Get more info on this wallpaper singapore website.
To minimize the visibility of seams, start by installing the first strip in an area that is not easily seen. Using your laser level, mark a straight line in a corner where you want the first strip to end. This line is critical to getting a smooth and even install. If the wall is not plumb, then each subsequent strip will become crooked. This is a common mistake that can be easily avoided by starting in an inconspicuous corner.
Align the First Strip
Before starting to hang your wallpaper, make sure that the wall is clean and ready for application. The wallpaper will adhere better to a clean surface. Remove outlet and switch covers, vacuum the room, and wipe down the walls to be sure that they are smooth and dry.
When you start to apply the first strip, use a level to make sure that the pattern lines up with the ceiling and baseboards. Once the strip is down, use a plastic smoother to work out any bubbles and ensure that the wallpaper adheres well to the wall.
When you’re finished, you should have a strip that extends all the way to the corner on the first wall and overlaps the next wall. If you want the seam to be hidden, use a wallpaper cutting guide, metal guiding bar, or long ruler to align the two lengths of paper together. Cut away the excess at the line where they overlap and put that strip aside.
Overlap the Second Strip
Some wallpapers require you to overlap the pattern when you install it on the wall, while others do not. It’s ultimately a matter of preference and you should try both methods to see what works best for you.
To avoid visible seams and to keep your walls looking smooth, always overlap the second strip of wallpaper by a few inches. Using the top of the overhang from the first strip, align panel 2 to match the pattern and smooth it down gently, removing any air bubbles as you go.
Continue the process of overlapping and smoothing until you get to your bottom edge. You may need to trim the corners again or use a putty knife or other tool to remove any excess. Then stand back and admire your work. It’s that easy! Your peel and stick wallpaper should look pretty fabulous. You can now move on to your next room or other project!
Trim the Corners
Since walls rarely hang perfectly straight or at right angles (any self-respecting tradesperson will tell you this), you’ll need to adjust the wallpaper on the edges as you go. To do this, measure the distance to the corner from the edge of the last strip you’ve hung and add on 1in to allow for an overlap. Use the measurement to trim your next piece of wallpaper and position it carefully on the wall. Once it’s in place, smooth it to eliminate bubbles and wrinkles.
With a little patience, hanging peel and stick wallpaper in a corner is easy. Just remember to plan ahead, prepare the wall, and keep the right tools and supplies on hand for a mess-free transformation. And most importantly, don’t forget to have fun!
